PUBLIC NOTICE No.  35/ 2009-14 dated 21.1.2010
Amendments/corrections in SION C-23 and C-2046
 
In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments/corrections in the Handbook of Procedures, (Vol.2), 2009-2014, as amended from time to time.

2. In the statement of Standard Input Output Norms (SION) as contained in the Handbook of Procedures (Vol.2), 2009-2014, as amended from time to time, amendments/corrections at appropriate places as mentioned in ANNEXURE "A” and ANNEXURE "B” to this Public Notice are made.

This issues in the public interest.

Sd/-
(R. S. Gujral)
DIRECTOR GENERAL OF FOREIGN TRADE

(Issued from F.No.01/81/162/259/AM’08/DES-II)
ANNEXURE “A” TO THE PUBLIC NOTICE NO. 35(RE-2010)/2009-2014 DATED : 21.01.2010
ENGINEERING PRODUCTS
AMENDMENTS/CORRECTIONS/MODIFICATION

SION at Sl. No. C- 23
C-23 Aluminium Utensils with interior PTFE Coating & Exterior Coating material as Silicon and or PTFE base (Non Stick) with/without handle(less than 40 micron thickness of PTFE Non-Stick Coating) 1 Kg. 1.Aluminium Scrap

OR		 1.15 Kgs./kg. content of Aluminium in the export product.
Aluminium Ingots 1.10 Kgs./kg content of Aluminium in the export product
2. PTFE Non-Stick Coating material 0.128 Ltr./sq.mtr. of internal coating area
3. High Temp. Resistance Coating material as Silicon and/or PTFE Base 0.128 Ltr./sq.mtr. of external coating area
4. Bakelite Moulding Powder 1.05 Kgs./kg content in the export product


Note:1. Item No.4 to be allowed only if exported with Bakelite handle.

2. Item No.3 will be allowed only if export product is painted.
 
ANNEXURE “B” TO THE PUBLIC NOTICE NO. 35(RE-2010)/2009-2014 DATED : 21.01.2010
ENGINEERING PRODUCTS
AMENDMENTS/CORRECTIONS/MODIFICATION

 
SION at Sl. No. C- 2046
 
C-2046 Aluminium Non Stick Utensils with interior Three Layer PTFE Coating of 40 micron & Exterior Coating Material as Silicon and or PTFE base(Non Stick) with/without handle 1 Kg. 1. Aluminium Scrap
OR		 1.15 Kgs./kg content of Aluminium in the export product.
Aluminium Ingots
OR		 1.10 Kgs./kg content of Aluminium in the export product
Aluminium Circles
OR		 1.07 Kgs./kg content of Aluminum in the export product
Uncoated Aluminium Utensils Net to net basis
2. PTFE Non-Stick Coating material 0.403 Ltr./sq.mtr. of internal coating area
3. High Temp. Resistance Coating material as Silicon and/or PTFE Base 0.128 Ltr./sq.mtr. of external coating area
4. Bakelite Moulding Powder 1.05 Kgs./kg. content in the export product
5. Stainless Steel Handles Net to net
6. Aluminium Rivets Net to Net

Note: 1. Item No.3 will be allowed only if export product is painted.

2. Item No.4 will be allowed if exported with Bakelite Handle.

3. Item No.5 will be allowed only if exported with Stainless Steel Handles.

ieport.com - India's Premier portal on DGFT, Customs and Central Excise matters