Policy Circular No. 9/2009-2014 Dated 1.10.2009
Subject: Clarification with regard to: A. Deemed Export Benefits on supplies
against Invalidation Letter / ARO; B. Value Addition requirement on clubbing -
regarding.
Attention is invited to paragraph 4.1.11 of
FTP wherein the reference has been made to the facility of Invalidation Letter
and Advance Release Order (ARO) for domestic procurement of the inputs for
export production. Trade and Industry have represented that for want of specific
provision stating the FTP benefits to the domestic supplier against Invalidation
Letter / ARO, field formations at times raise objections.
In this regard, it is informed that the purpose of Invalidation letter / ARO is
to facilitate duty neutralisation or inputs procured from the domestic market,
in lieu of duty free imports allowed under the authorisation. Accordingly, it is
clarified that against invalidation letter, the supplier can avail Advance
Authorisation for Intermediate supplies and TED refund (wherever Excise
exemption is not available against such supplies), whereas against ARO, the
supplier is entitled for deemed export duty drawback, as applicable. Provision
of Paragraph 4.1.11 of FTP has to be read with Paragraphs 8.3 and 8.4.1 of FTP.
2. Value addition requirement on clubbing of Advance Authorisations of Paragraph
4.20 of HBP v1:-
Trade and Industry have represented that since the minimum prescribed value
addition under Advance Authorisation Scheme has been enhanced to 15% in the FTP
2009-14, the required minimum value addition for the purpose of clubbing of
advance authorisations issued during the pre-2009-14 policy and that of 2009-14
policy, needs to be clarified for a uniform application by the Regional
Authorities.
In this regard, it is clarified that the value addition on clubbing should be
the prescribed minimum value addition stated in the FTP and not the declared
value addition given in the application. In case of clubbing of authorisations
with different minimum prescribed value addition, the aggregate value addition
should be the weighted average based on CIF value utilized in the respective
authorisations.
For clarity, an illustration is given below with reference to two Authorisations
issued with different V.A Norms:
(i) CIF Value utilized under Authorisation A (issued under positive V.A
provision): say, Rs. 1000/-.
(ii) CIF value utilized under Authorisation B (issued under 15% V.A provision):
say Rs. 2000/-.
(iii) Minimum FOB Value required under Authorisation A shall be: Rs. 1000/-.
(iv) Minimum FOB value required under Authorisation B shall be: Rs. 2300/-.
(v) Upon Clubbing, CIF value of the clubbed authorisation would be Rs. 3000/-
and the minimum FOB value of the clubbed authorisation would be Rs. 3300/-.
This will ensure that the prescribed minimum value addition on the respective
authorisations is achieved indicating that the weighted average value addition
for the clubbed authorisation is maintained.
This issues with the approval of Competent Authority.
(Tapan Mazumder)
Joint Director General of Foreign Trade
Tel: 011-23061050
E-mail: tmazumder@nic.in
(Issued from F.No. 01/94/180/ Open House Meet -Amritsar
/AM10/PC-4)
ieport.com - India's Premier portal on DGFT, Customs and Central Excise matters