Sl.

No.

Page

No.

Reference

Amendments/Corrections

1

2

3

4

1.

59

Chemicals & Allied Products

Sl.No.A321

The description of import item at sl. No.1 (with quantity) shall be amended  to read as under:-

“1. 3,5 Lutidine        -        2.18 kg

             OR

       2,3,5 Trimethyl  -        2.45 kg

        Pyridine”

2.

59

Chemicals & Allied Products

Sl.No.A323

The description of import item at sl. No.1 (with quantity) shall be amended to read as under:-

“1. 3,5 Lutidine        -        0.18 kg

             OR

      2,3,5 Trimethyl   -        0.21 kg

       Pyridine”

3.

148

Chemicals & Allied Products

Sl.No.A1089   

After import item at Sl. No. 1, the additional import item (with quantity) shall be added:-

“2. Furnace Oil        -      0.383 Litres”

4.

232

Chemicals & Allied Products

Sl.No.A1805   

After import item at Sl. No. 3, the following additional import item (with quantity) shall be added:-

“4. Furnace Oil        -      350 Litre”

5.

326

Chemicals & Allied Products

Sl.No.A2532

The description of import item at Sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“Metallurgical Grade Silicon”

6.

340

Chemicals & Allied Products

Sl.No.A2684

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A2684

2 Chloro Methyl 3,5 Dimethyl 4 Methoxy Pyridine Hcl

1 kg

1.     3,5 Lutidine

           OR

     2,3,5 Trimethyl

     Pyridine

2.     Methylene Chloride

3.     Methanol/ Diemthyl Formamide

4.     Acetone/IPA

5.     Activatted Carbon

1.77 kg

2.00 kg

7.83 kg

4.14 kg

2.07 kg

0.100 kg

7.

341

Chemicals & Allied Products

Sl.No.A2691   

The note below this entry shall be replaced by the following note:-

“Note: This norm is valid  upto 31.03.2003.”

8.

341

Chemicals & Allied Products

Sl.No.A2692   

The note below this entry shall be replaced by the following note:-

“Note: This norm is valid  upto 31.03.2003.”

9.

341

Chemicals & Allied Products

Sl.No.A2693   

The note below this entry shall be replaced by the following note:-

“Note: This norm is valid  upto 31.03.2003.”

10.

401

Electronics Product

Sl.No.B53

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

B53

Electronic Capacitor Grade Metalised Dielectric Plastic (Polypropylene) Film

1 MT

1.     Plain Polypropylene Film

2.     Super pure aluminium wire of purity 99.9% or above

               OR

2. Super pure aluminium

     wire of purity 99.9%

     or above

                OR

2. Zinc Rod of purity

     99.9% or above

3.     Evaporation Boat

4.     Kapton Bend

5.     Difusion pump Oil

6.     Masking Band/Silicon Oil

7.     B.N. Suspension

8.     Graphite Foil

1.2 MT

37 kg

8 kg

29 kg

12 Pcs.

0.30 kg

0.7 kg

0.7 kg

1.0 kg

1 Sq.meter

11.

504 - 505

Engineering Product

Sl.No.C177

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”             

12.

 505

Engineering Product

Sl.No.C178

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

13.

 505

Engineering Product

Sl.No.C179

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

14.

 505

Engineering Product

Sl.No.C180

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

15.

 505

Engineering Product

Sl.No.C181

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

16.

 506

Engineering Product

Sl.No.C182

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

17.

 506

Engineering Product

Sl.No.C183

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

18.

 506

Engineering Product

Sl.No.C184

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

19.

 506 - 507

Engineering Product

Sl.No.C185

The description of import item at sl. No. 1, (without any change in quantity) shall be amended to read as under:-

“CRGO Steel Laminations/ Sheets/ Coil with insulating coating of inorganic/ organic material”            

20.

531

Engineering Product

Sl.No.C274

The norm covered by this entry shall be substituted by the following:-            

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C274

Radiators for Transformers (made out of CRCA Steel Sheet/Coil

1 kg

1.     CRCA Non-alloy Steel Sheets/ Coils

1.05 kg/kg

21.

754 - 755

Engineering Product

Sl.No.C1285

After Foot Note No. 3, the following foot Note shall be added:-

“Note: 4. Wherever there is export of Ball Bearing with Housing, after ascertaining the weight of the Ball Bearing, the import of input maybe allowed applying relevant SION at C-1280 to1285”

22.

869 -870

Engineering Product

Sl.No.C1742

1.     The description of import item at Sl. No. 20, shall be amended (without any change in quantity) to read as under:-

“Welding Electrodes and or Welding Wire”

2.     A Foot Note below this entry shall be added as under:-

“Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to the quantity of Welding Wire.”

23.

964

Plastic Products

Sl.No.H-19

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-19

Anion Exchange Resin

1 kg

1.     Styrene

2.     Divinyl Benzene Monomer

3.     Ethylene Dichloride

4.     Polyvinyl Alcohol

5.     Methanol Formaldehyde Solution

             OR

a) Methanol

     b) Paraformaldehyde

6.     Dimethyl Ethanol Amine

0.435 kg

0.030 kg

0.975 kg

0.1755 kg

0.788 kg

0.448 kg

0.330 kg

0.275 kg

24.

965

Plastic Products

Sl.No.H-28

The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“Polycarbonate Resin/ Moulding Powder/ Granules”

25.

965

Plastic Products

Sl.No.H-29

The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:-

“Polycarbonate Resin/ Moulding Powder/ Granules”

26.

968

Plastic Products

Sl.No.H-45

After the import item at Sl. No.1 the following additional import item (with quantity) shall be added:-

“2. High Speed Diesel      -          0.533 Litre”

27.

1022

Plastic Products

Sl.No.H-333

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-333

Twine/Rope made of HDPE/PP

1 kg

1. Relevant HDPE/ PP Granules/ Chips

1.07 kg/kg content in the export product

Note : In case of export of Coloured items, relevant coloured Master Batches shall also be allowed as an additional input @ 0.02 kg/kg weight of Polymer and accordingly the quantity of relevant Polymer shall be reduced to1.05 kg/kg content in the export product.

28.

1044-1045

Plastic Products

Sl.No.H-461

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-461

Prepared Adhesives based on Plastics (Two component Laminating Adhesives)

A.   Adhesive (Polyurethane Solution containing 60% Resin content and 40% Solvent)

           OR

1 kg

1.     Adipic Acid

2.     Isophthalic Acid

3.     Mono Ethylene Glycol

4.     Diethylene Glycol

5.     1,6-Hexane Diol

6.     Toluene Di-iso-cyanate

7.     EthylAcetate/ Methyl Ethyl Ketone (relevant)

0.090 kg

0.258 kg

0.050 kg

0.195 kg

0.015 kg

0.035 kg

0.400 kg

B.   1.Additive (Poly Isocyanate Solution containing 50% Solid and 50% Solvent)

B.2. Additive (Polyester Solution containing 50% Resin content and 50% Ethyl Acetate)

1 kg

1 kg

1.     Adipic Acid

2.     Isophthalic Acid

3.     Mono Ethylene Glycol

4.     Diethylene Glycol

5.     1,6-Hexane Diol

6.     Toluene Di-iso-cyanate

7.     Ethyl Acetate/ Methyl Ethyl Ketone (relevant)

1. Adipic Acid

1.     Diethylene Glycol

2.     Ethyl Acetate

0.012 kg

0.037 kg

0.032 kg

0.060 kg

0.002 kg

0.372 kg

0.500 kg

0.385 kg

0.165 kg

0.500 kg

29.

29

Plastic Products

Sl.No.H-487 (Notified vide Public Notice No. 20 Dated:01/07/2002)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-487

Vinyl Acetate Co-polymer Emulsion Stabilized with Colloid

1 kg

A)    For Solid content 54+/-1%

1.     Vinyl Acetate Monomer

2.     Hydroxy Ethyl Cellulose

0.315 kg

0.018 kg

             OR

B)    For Solid content 48+/-1%

1.     Vinyl Acetate Monomer

2.     Hydroxy Ethyl Cellulose

0.294 kg

0.019 kg

Note: The two variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declaration.

30.

30

Plastic Products

Sl.No.H-491 (Notified vide Public Notice No. 20 Dated:01/07/2002)

The description of export item shall be amended to read as under:-

“Ethyl Acrylate and Methaacrylic Acid copolymer emulsion having solids 29+/-1% stabilized with emulsifier”

31.

30

Plastic Products

Sl.No.H-492 (Notified vide Public Notice No. 20 Dated:01/07/2002)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-492

Styrene and Acrylate Co-polymer Emulsion Stabilized with Emulsifier

1 kg

A)     For 50+/-1% Solid content

1.     Styrene

2.     Butyl Acrylate

3.     Acrylic Acid

4.     Acryl Amide

             OR

B)     For 50+/-1% Solid content

1.     Styrene

2.     Butyl Acrylate

3.     Ethyl Acrylate

0.231 kg

0.239 kg

0.012 kg

0.007 kg

0.185 kg

0.117 kg

0.167 kg

           OR

C)     For 47+/-1% Solid content

1.     Styrene

2.     Butyl Acrylate

0.281 kg

0.149 kg

Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A, B or C as per applicants declaration.

32.

31

Plastic Products

Sl.No.H-498 (Notified vide Public Notice No. 20 Dated:01/07/2002)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-498

Ethyl Acrylate and Methyl Methacrylate Copolymer Emulsion having Solid content 5+/-1% Stabilized with Emulsifier

1 kg

1.     Ethyl Acrylate

2.     Itacnoic Acid

3.     Methyl Metha Acrylate

0.482 kg

0.010 kg

0.055 kg

33.

31

Plastic Products

Sl.No.H-499 (Notified vide Public Notice No. 20 Dated:01/07/2002)

The norm covered by this entry shall be substituted by the following:-

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H-499

Synthetic Tanning  Agent – Metha acrylic Acid Homopolymer aqueous solution

A.   Solid content 30+/-1%

         OR

B.    Solid content 40+/-1%

1 kg

A.   Metha Acrylic Acid

                        OR

B.    Metha Acrylic Acid

0.212 kg

0.335 kg

Note : The inputs quantities of Metha acrylic acid are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A or B as per applicants declarations.

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

A3134

1-Ethyl 5-Carbamoyl 6-Hydroxy 4-Methyl-3-Sulfomethyl-2- Pyridone

1 kg

1.   Aceto Acetic Methyl Ester

2.   Mono Ethyl Amine (70%)

3.   Methyl Cyano Acetate

0.696 kg

0.580 kg

0.571 kg

A3135

Blend of Sodium Salt of Polymer of Naphthalene Sulfonic Acid with Formaldehyde and Aromatic Di-basic Salt (Active content 60%)

1 kg

1.     Crude Naphthalene

0.220 kg

A3136

Azidothymidine (Zidovudine BP)

1 kg

1.     Betathymidine

2.     Trityl Chloride

3.     Methane Sulfonide Chloride

4.     Sodium Azide

5.     Tert. Butyl Amine

6.     Triethyl Amine

7.     1,4-Dioxane/ Toluene

8.     Diemethyl Sulfoxide/ Methanol

9.     Methylene Chloride/ Dimethyl Formamide

2.05 kg

2.80 kg

1.47 kg

1.59 kg

3.50 kg

3.69 kg

5.50 kg

7.00 kg

5.33 kg

A3137

2,4-0-BIS (Trimethyl Silyl) –6-0-Methyl Erthromycin-A9-(0-1- Methoxy-1-Methyl Ethyl Oxime)

1 kg

1.     Erthromycin Base (on 100% Activity Basis)

2.     2-Methoxy propene

3.     Pyridine Hydrobromide

4.     Hexa Methyl Di Silazane

5.     Hydroxylamine Hcl

6.     Dimethyl Sulfoxide/ Methanol

7.     MTBE/Methylene Chloride

8.     Methyl Iodide or Iodine

9.     Triethylamine

1.055 kg

0.333 kg

0.212 kg

0.356 kg

0.50 kg

3.27 kg

7.03   kg

0.237 kg

0.30 kg

A3138

Hepatitis-B vaccine (rDNA) BP (Adult) 10 ML – 10 Doses

1 lakh Vials (10 ML, 10 Doses)

1.     Hapatitis B Bulk Protein (H BsAg Protein)

2.     Aluminium Hydroxide Gel 3%

3.     Thiomersal

4.     Glass Vials

5.     Rubber Stoppers

6.     Aluminium Caps/ Seals

7.     Cold Chain Monitor Cards

0.04347 kgs

0.83160 kgs

0.06930 kgs

115,000 Nos

110,000 Nos

110,000 Nos

117 Nos

A3139

Citolopram Hydro Bromide

1 kg

1.     5-Bromo Phthalide

2.     1-Bromo 4-Fluoro Benzene

3.     3-Diemthyl Amino Propyl Chloride Hcl

4.     Tetrahydrofuran

5.     Sulfolane

4.19 kg

4.31 kg

2.35 kg

25.63 kg

1.98 kg

A3140

Chlorine

1 kg

1.     Furnace Oil

0.269 Litres

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

B-258

Electronic Capacitor Grade Metalised Dielectric Plastic (Polyester) Film

1 MT

1.     Plain Polyester Film

2.     Super Pure Aluminium wire of purity 99.9% or above

3.     Graphite Foil

4.     Evaporation Boat

5.     Boron Nitride Suspension

6.     Fomblin Oil

1.2 MT

28 kg

1 sq.mtr.

8 Nos.

1 kg

1 kg

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

C1859

Aluminium Redrawn Alloy Tube/Pipes

1 kg

1.       Aluminium Extruded Hollow Alloy Tubes/ Pipes

1.02 kg

C1860

Transformer MS Tank/Clamps

1 kg

1.     HR Non-Alloy Steel Sheet/Wide Coil

2.     Polyurethane Epoxy Paint

3.     Zinc Rich Epoxy Primer

0.945 kg

| Upto 4%

| of FOB

| value of

|export

C1861

Circles (Circular Blank/ Disc) made of  CR Non-alloy Steel Sheets/ Strips/Wide Coils

1 kg

3.     Relevant Cold Rolled (including CRCA/CRCA-Skin Passed / Temper Passed) Non-alloy Steel Strips/Wide Coils

4.     VCI/ Rusto Paper

5.     Steel Strapping

1.16 kg

As per Packing policy

As per Packing policy

C1862

Automobile Radiator Parts made of Brass

2 kg

1.     Brass Sheet

2.     Brass Pipe

3.     Brass Rod

1.05     kg/kg content in the export product

1.01 kg/kg content in the export product

1.05 kg/kg content in the export product

Sl.No.

Export Item

Qty.

Import Item

Qty. Allowed

H520

Vinyl Acetate Homo-polymer Emulsions Stabilized by colloids

1 kg

A)  For Solid content 44%

1.      Vinyl Acetate Monomer

2.      Poly Vinyl Alcohol

               OR

B)   For Solid content 46%

1.      Vinyl Acetate Monomer

2.      Poly Vinyl Alcohol

3.      Diethylene Glycol Dibenzoate

               OR

C)  For Solid content 40%

1.      Vinyl Acetate Monomer

2.      Poly Vinyl Alcohol

0.408 kg

0.024 kg

0.364 kg

0.021 kg

0.109 kg

0.373 kg

0.052 kg

Note: The three variations in the solid contents are due to different materials. The input quantities are specific quantities and not the pro-rata quantities. The applications therefore have to be considered either as per A,B or C as per applicants declaration.

H521

Ethyl Acrylate and Acrylonitrile Copolymer Emulsion having Solids 45+/-1% Stabilized with Emulsifier

1 kg

1.       Ethyl Acrylate

2.       Acrylonitrile

3.       Acrylamide

4.       Acrylic Acid

0.249 kg

0.143 kg

0.028 kg

0.004 kg

H522

Synthetic Tanning Agent – Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1%

1 kg

1.     Acrylic Acid

2.     Acrylonitrile

0.180 kg

0.103 kg

H523

Synthetic Tanning Agent – Metha Acrylic Acid & Acrylonitrile Co-polymer aqueous Solution Solid content 35+/-1%

1 kg

1.     Metha Acrylic Acid

2.     Acrylonitrile

0.168 kg

0.023 kg

H524

Polyurethane Based Adhesive having Solid content 11.5+/-0.5% kg

1 kg

1.     Polyurethane Resins

0.095 kg

Note : For any variation in the Solid content the imported raw material content shall be worked out on pro-rata basis.